Steel DN Mate
Steel DN Mate 30 Pack T316 Marine Grade Stainless Steel 30 Degree Angle Beveled Protector Sleeves, Wood Post Protector Sleeve for 1/8" Deck Cable Railing kit with a Drill Bit, DIY Balustrade DT03
Steel DN Mate 30 Pack T316 Marine Grade Stainless Steel 30 Degree Angle Beveled Protector Sleeves, Wood Post Protector Sleeve for 1/8" Deck Cable Railing kit with a Drill Bit, DIY Balustrade DT03
Couldn't load pickup availability
Design: The design of 30° protector sleeves can replace the combination of straight sleeves + 30° beveled washer, it can insert into the hole perfectly. It is a hole fitting for 1/8" wood post Cable runs, where the hole is drilled at an angle about 30 degrees in the wooden post. Sleeve Inner diameter:5/32 inch, fits for 1/8” cable railing.
Application: This fitting is ideal for cleanly finishing drilled holes on intermediate angled posts used on stairways and ramps. In addition, protective sleeves can be used to prevent the holes in the wood from collapsing under the tension of steel wire. The fitting can be installed on both sides of intermediate posts as well as the inner side of terminal posts.
See picture 5 for a cost-effective cable railing system. Scroll down the page to quickly access the matching products and get a complete set of railing system components, including 1/8" swage lag screw (DM30), 1/8" wire rope with cutter (DW55), hydraulic crimper (DC01), and level protector sleeve (DP05).
Package includes 30packs angle sleeves, a wood drill bit (1/4"). This angle cable railing kit can withstand exposure to saltwater, high humidity, and other harsh weather conditions, which ensure safety and longevity of your cable railing system. Buy it with easy, Steel DN Mate team works with every effort to provide quality products and professional service.
Product Description
T316 Stainless Steel Protactor Sleeves --- Made railing much more attractive
This 30 Degree Wood Post Protector Sleeves are designed for 1/8" Cable runs where the hole is drilled at an angle near 30° in the post. Use this hole finishing fitting to cleanly finish drilled holes on intermediate angled posts on stair, ramps and post corner.
The cable railing hardware is made of T316 Marine Grade stainless steel, which has excellent resistance to rust, corrosion and extreme weather. Ideal for indoor and outdoor, even coastal applications subject to high humidity and salt air.
These stainless steel protector sleeves protect wooden post and stainless steel cable from friction wear. Using these protective sleeves will make it easier to stretch cable through posts and also cover the rough edges of the drilled holes to create a clean look.
Important information to know before buying
- Only fits for wood posts, not fits for metal posts.
- Only suitable for 1/8" wire rope.
- Only be used for middle posts, not as terminal fittings.
Real SUS316 MATERIAL
- Rust resistance
- Durable
- Stable
- Wear-resistant
- Corrosion resistance
Steel DN Mate Cable Railing Promised
All of T316 Cable Railing will not rust in normal using situation even after installed 15 years, if you have any quality problem after installation, pls don't hesitate to con-tact us. We will do our best to ser-ve you.
What you get
- 30 × 30° Protector Sleeves
- 1 × Wood Drill Bit
|
|
|
|
|---|---|---|
IMPORTANT: 2 kinds of Angle Protective SleevesWe have 2 different degrees of stainless steel angle protector: 30 Degree and 45 Degree. PLS choose the correct protector sleeves according to the angle of your stairs or ramps. |
Clean Look and a Great Finishing TouchThe 30 degree bevel protector sleeves can perfectly plug the hole. Preventing corner and stair transition posts from cable abrasion. Nice touch and Good finished look! |
Ideal for Indoor and Outdoor Railing SystemMade of T316 Marine Grade stainless steel, which has excellent resistance to rust, corrosion and extreme weather. Ideal for indoor and outdoor stair ramps railing system. |
Easy to install
We replaced the complex turnbuckle with two simple left & right lag screws, which not only simplifies the system, but also reduces the budget. It is an elegant and simple looking, durable and economical best choice for horizontal, angled and vertical cable railing systems.
The above system includes:
- Left&right swage lag screws -- DM30
- 30° Angle protector sleeves -- DT03 (for angle middle posts)
- 1/8" Level protector sleeves --DP05 (for level middle posts)
- Steel wire cable and cutter --DW55
- Hydraulic crimping tool -- DC01
 |
 |
 |
 |
 |
 |
|
|---|---|---|---|---|---|---|
| Left & Right Swage Lag Screws DM30 | 30 Degree Angle Protector Sleeve DT05 | Level Protector Sleeve DP05 | SUS316 Steel Cable 1/8" DW55 | Hydraulic Crimper Tool DC01 | Steel Drill Jig | |
| Material | T316 Marine Grade | T316 Marine Grade | T316 Marine Grade | T316 Marine Grade | Steel | Steel |
| Rust-Proof | ||||||
| For Level / Angle | Level / Angle | Angle | Level | Level / Angle | Level / Angle | |
| Size | 1/8" | 1/8" × 30 Degree | 1/8" | 1/8" | All | All |
Materials
Materials
Shipping & Returns
Shipping & Returns
Dimensions
Dimensions
Care Instructions
Care Instructions
Image with text
Pair text with an image to focus on your chosen product, collection, or blog post. Add details on availability, style, or even provide a review.
-
Free Shipping
Pair text with an image to focus on your chosen product, collection, or blog post. Add details on availability, style, or even provide a review.
-
Hassle-Free Exchanges
Pair text with an image to focus on your chosen product, collection, or blog post. Add details on availability, style, or even provide a review.